Ipsec Settings - Ricoh SP 310 DN User Manual

4. Configuring the Machine Using Utilities
WEP key valid
characters
• [WPA2-PSK]
When this is selected, communication will be encrypted with WPA2 (WiFi Protected Access 2).
Enter a value in [WPA Passphrase] that contains from 8 to 64 characters.
• [Mixed Mode WPA/WPA2]
When this is selected, communication will be encrypted with WPA (WiFi Protected Access) or
WPA2 (WiFi Protected Access 2). Enter a value in [WPA Passphrase] that contains from 8 to 64
characters.

IPsec Settings

[IPsec Global Settings] tab
• [IPsec Function]
Select whether to enable or disable IPsec.
• [Default Policy]
Select whether to allow for the default IPsec policy.
• [Broadcast and Multicast Bypass]
Select the services that you do not want to apply IPsec from the following:
[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
• [All ICMP Bypass]
Select whether to apply IPsec to ICMP packets (IPv4 and IPv6).
[IPsec Policy List] tab
Click the [IPsec Policy List] tab on the IP security settings page to display the list of registered IPsec
policies.
54
WEP key length is 64 bits
WEP format is WEP format is
Hex
0–9, A–F, a–f 0x20–0x7e
WEP key length is 128 bits
WEP format is
ASCII Hex
0–9, A–F, a–f
WEP format is
ASCII
0x20–0x7e