Turn Signals And Headlights - Honda Automobiles 2008 Accord Sedan Owner's Manual

Table of Contents

Advertisement

07/06/15 11:18:17 31TA0600 0074 
EX-L V6 model is shown.
1.
Turn signal
2.
Off
3.
Parking and indicator lights
4.
AUTO
5.
Headlights on
6.
High beams
7.
Flash high beams
8.
Fog lights off
9.
Fog lights on
:
If equipped
Turn Signal
Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to the
center when you release it or
complete a turn.
Turning the switch to
Headlights
the ''
'' position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate lights.
Turning the switch to the ''
position turns on the headlights.
If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver's
door.

Turn Signals and Headlights

When the light switch is in either of
these positions, the lights on
indicator comes on as a reminder.
This indicator stays on if you leave
the lights on and turn the ignition
switch to the ACCESSORY (I) or
LOCK (0) position.
To switch from low
High Beams
beams to high beams, push the left
lever forward until you hear a click.
The blue high beam indicator will
come on (see page
61
''
to return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams stay on as long as you hold
the lever back.
). Pull it back
69

Advertisement

Table of Contents
loading

Table of Contents