Panasonic Lumix DMC-FS40 Operating Instructions Manual page 100

Lens
●
If lens is dirty:
Images may appear slightly white if lens is dirty (fingerprints, etc.). Turn the power on, hold the
extracted lens barrel with your fingers, and gently wipe the lens surface with a soft, dry cloth.
●
Do not leave the lens exposed to direct sunlight.
●
Do not touch the lens barrier, as this may damage lens. Be careful when removing camera from
bag, etc.
When using a tripod or unipod
●
Do not apply excessive force or tighten screws when they are crooked. (This may damage the
camera, screw hole, or label.)
●
Ensure that the tripod is stable. (Refer to the tripod instructions.)
●
You may not be able to remove the card or the battery when using a tripod or unipod.
Personal Information
If birthdays are set in [Baby] Mode, keep in mind that the camera and recorded pictures will contain
personal information.
●
Disclaimer
• Data containing personal information can be altered or lost due to malfunction, static electricity,
accidents, breakdowns, repairs, or other operations.
Panasonic will not be liable for any damage that occurs, direct or indirect, as a result of the
alteration or loss of data containing personal information.
●
When ordering repairs or transferring/disposing of the camera
• To protect your personal information, please reset the settings. (→37)
• If any pictures are contained in the built-in memory, copy (→77) them to a memory card if
necessary, and then format (→39) the built-in memory.
• Remove the memory card from the camera.
• When ordering repairs, the built-in memory and other settings may be returned to the initial
purchase state.
• If the above operations cannot be performed because of a camera malfunction, consult with the
dealer or nearest Service Centre.
When transferring or disposing of your memory card, see "When disposing of/transferring
memory cards" in the previous section.
- 100 -
Usage cautions and notes