Step 4: Attaching The Base Plate To The Handlebar Base - Garmin ZUMO 665 Quick Start Manual

Option B: Installing the Handlebar Base to the Clutch/Brake Clamp Bracket:
&WARNING
Incorrectly installing the handlebar base to the clutch/brake bracket can cause brake or clutch
malfunction, which can result in damage to the vehicle and the risk of personal injury or death.
Garmin strongly recommends having an experienced installer with the proper knowledge of
clutch/brake ystems
ins~
the unit. __ __ _ __
Clutch/brake
clamp bracket
OTE:
Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on
your clutch/brake clamp bracket.
1. Remove the two factory bolts on your clutch/brake clamp bracket.
2. Thread the new bolts through the handlebar base, spacers, and clamp bracket.
3. Tighten the bolts to secure the base.
Handlebar
base
Step 3: Attaching the Base Plate to the zumo Mount
1.' Thread the M4
x
40 mm panhead screws through the washers, cradle, spacers, and base
plate.
2. Tighten the nuts to secure the base plate.
Nuts
Base plate
Washers
Panhead screws
Spacers
Step 4: Attaching the Base Plate to the Handlebar Base
1. Align the ball of the handlebar base and the ball of the base plate with the double-socket
arm. Base plate
2. Tighten the knob slightly. Double-socket
3. Adjust for better viewing and operation. Cradle arm
4. Tighten the knob to secure the mount.
Step 5: Installing Your zumo in
the Mount
1. Fit the bottom of your zOmo into the cradle.
2. Tilt the zOmo back until it snaps into place.