Table of Contents
Advertisement
7
Setting the TV on the Wall
Dissembling the stand base:
1
Disconnect all the cables and cords from the TV to prevent breakage.
2
Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3
Press the stand locks on both sides and remove the stand.
Wall mounting the TV:
1
Purchase a VESA compatible wall bracket:
VESA 400 X 400, 4 holes, M4, 16 mm, 50 kg.
2
Locate your ideal TV position on the wall.
3
Fix the wall bracket firmly on the wall.
4
Secure the TV to the bracket using the 6 mount
holes on the back and center of the TV.
Note:
•
Please read the instructions of your specific wall bracket to properly wall mount
the TV.
•
The pitch of the mounting holes is 400mm horizontally and 400mm vertically.
•
The screws type required is metric: M4, 16 mm length.
•
The TV stand base can be screwed on a table or a hard surface using the hole
on the back of the stand base.
•
The leaves are meant as designs only, please do not remove.
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. please contact with
Hannspree dealers in wall mount bracket. You can ask a qualified service personnel about
using an optional bracket to mount the TV to the wall. Please add rubber cover when this TV is
mounted on the wall.
Equipment to be used with for open site.
52
Advertisement
Table of Contents
