Table of Contents
Advertisement
3.4
Adjusting Channel Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
Press
/
on the remote control or
CH
/ CH
on the control panel to select
Channel menu.
3
Press
/ OK on the remote control or
INPUT on the control panel to enter the
Channel menu.
4
Press
/
on the remote control or CH
item.
5
Press
/ OK on the remote control or INPUT on the control panel to enter the item.
6
Press
/
on the remote control or
the scales or press OK on the remote control or INPUT on the control panel to mark
an item.
7
Press RETURN to return to the Channel menu.
8
Press MENU to exit the Channel menu.
9
The Channel menu can be used to perform a channel search and edit channel list
(see "Performing an Automatic Channel Search" on page 28 and "Editing Channel
Table or Favorite Channel" on page 29).
•The Antenna can be set to
•The Scan Mode can be set to
•The Auto Scan can be set to
only).
Note:
The Channel settings are available when the signal is set to TV source.
Picture
Audio
Channel
V-CHIP
Setup
/ CH
VOL+
VOL-
/
Air
or Cable.
Auto
, Analog, or Digital.
Auto
, Standard, HRC, or IRC (under Cable mode
Antenna
Scan Mode
Auto Scan
Channel List
Move
Enter
Return
OK
Return
on the control panel to select an
on the control panel to change
Exit
Menu
33
Advertisement
Table of Contents
