Chapter 9: Traffic Control; Traffic Control - Tenda W302R User Manual

Chapter 9: Traffic Control

Traffic Control

Traffic control is used to limit
communication speed in the LAN and WAN.
Up to 20 entries can be supported with the
capability for at most 254 PCs' speed
control, including for IP address range
configuration.
Enable Traffic Control: To enable or
disable the internal IP bandwidth control.
Interface: To limit the uploading and
downloading bandwidth in WAN port.
Service: To select the controlled service
type, such as HTTP service.
IP Starting Address: The first IP address
for traffic control.
IP Ending Address: The last IP address for
traffic control.
Uploading/Downloading: To specify the
Wireless-N Broadband Router
48