Using The On-Screen Display (Osd) Controls - Lenovo LI2063 User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
2. Use
function. If there is a sub-menu, you can move between options using
then press
save.
3. Press
4. Press and hold
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key
10 seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
or "DDC/CI enable" shows on the screen.
Brightness/Contrast
Brightness
Exit Left
to open the main OSD menu.
or to move among the icons. Select an icon and press
to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
Contrast
Right Ok
or to make adjustments. Press
for 10 seconds to unlock the OSD and
, Press and hold the
to access that
or ,
to
button for
Chapter 2. 2-4