Control Panel And Remote - LG LP1213GXR Owner's Manual

CONTROL PANEL AND REMOTE

4
5
Operation of functions is the same when using the remote or the
control panel, unless otherwise stated.
For detailed instructions on each function, see the follow ing pages.
1
POWER ON/OFF
Turns the air conditioner on and off. When turning on,
a rising tone will sound to confirm. When turning off,
a descending tone will sound.
2
MODE
Switches the air conditioner between COOL, FAN, DRY,
and ENERGY SAVER modes. The active mode will be
shown in the LED display.
3
FAN
Adjusts the circulation fan speed among low (F1),
medium (F2), and high (F3) .
TIMER
4
Allows you to set a delay from 1 to 24 hours that will
turn the air conditioner on or off automatically.
5
/ (TEMP/TIMER)
Use these buttons to adjust the set temperature up or
down, or to adjust the timer delay time.
DISPLAY
6 LED
A PART shows the set temperature (°C or °F),
fan speed, or the selected TIMER delay.
B PART shows the active mode (COOL, FAN, DRY
and ENERGY SAVER), Auto clean, Water full.
7
°C/°F
Use this button,the temperature display can be switched
between degrees Celsius (°C) and degrees Fahrenheit
(°F) . This function can be activated from the remote
only.
A PART
6
B PART
P A R T S A N D F E A T U R E S
1
2
3
5
3
4
7
8
AUTO CLEAN
The AUTO CLEAN function is used to remove moisture
from the heat exchangers and helps prevent odor from
forming. This function can be activated from the remote
only.
9
AUTO SWING
Sets the motorized air discharge to oscillate,
improving air circulation in the room. This function can
be activated from the remote only .
6
1
2
9
8
7