LG B2050 User Manual page 59

B2050 ˛ 150*120_0609
Internet [Menu 7 ]
- Data settings
Appeares only if you select Data settings as a
Bearer\service.
IP address : Enter the IP address of the WAP
gateway you want.
Dial number : Enter the telephone number to dial to
access your WAP gateway.
User ID : The users identity for your dial-up server
(and NOT the WAP gateway).
Password : The password required by your dial-up
server (and NOT the WAP gateway) to
identify you.
Call type : Select the type of data call: Analogue or
Digital (ISDN).
Call speed : The speed of your data connection;
9600 or 14400.
Linger time : You need to enter timeout period.
After entering that, the WAP
navigation service will be unavailable
if any data is not input or transferred.
- GPRS settings
The service settings are only available when GPRS
is chosen as a bearer service.
2005.06.09 11:27 AM
B2050 User Guide
˘ ` 58
IP address : Input the IP address of the WAP
gateway you access.
APN : Input the APN of the GPRS.
User ID : The users identify for your APN server.
Password : The password required by your APN
server.
- Connection type
The options for connection type are Temporary,
Continuous or HTTP and depend on the gateway
you are using.
Continuous
A confirmed delivery mechanism but generates
more network traffic.
Temporary
A non-confirmed (connectionless) service.
HTTP
Connecting Clients to Server directly in HTTP
- Proxy settings
IP address : Input the IP address of the proxy.
Port : Input the port number of the proxy.
58