Command Control Via The Network - Hitachi CP-CX251N Operating And Users Manual

Command Control via the Network

Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (&17).
Connection
Turn off the projector and the computer.
1.
If you use wired LAN, connect the projector's LAN port to the computer's
2.
LAN port with a LAN cable. Use the cable that fulfi lls the specifi cation shown
in fi gure.
Turn the computer on, and after the computer has started up turn the projector
3.
on.
LAN cable (CAT-5 or greater)
LAN
11
LAN