Table of Contents
Advertisement
Cassette & Radio Operation
Cassette Operation
1
Slide the FUNCTION SWITCH (8) to the TAPE
position.
2
Insert a prerecorded tape through the CASSETTE
DOOR (21). Tape will slide into the cassette
mechanism and start playing.
3
Adjust the volume level by turning the VOLUME
KNOB (9).
4
For fast forwarding, press the CASSETTE
EJECT/F.F (20) half way in. Pressing again,
will stop the fast forwarding and return the
cassette to the playing mode.
5
To stop and eject the cassette, press the
CASSETTE EJECT/F.F (20) in completely.
6
When one side of the tape finishes playing, the
cassette will automatically stop.
NOTE: Remove the tape from the unit when it is not
in use or stopped.
8
Radio Operation
1
Slide the FUNCTION SWITCH (8) to the
RADIO position.
2
Press the AM/FM BUTTON (7) to the desired
tuning band (AM
or FM
).
3
Select the desired radio station by rotating
TUNING KNOB (17).
4
Adjust the VOLUME KNOB (9) to the desired
sound level.
Antenna
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (34) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the FM WIRE ANTENNA (34) to any
outside antenna.
Unit Controls
22
Turntable Supension Screw
23
Center Spindle
24
Tension Arm
25
Tone Arm
26
Size Select Switch
27
Tone Arm Rest
28
Turntable Switch
29
Speed Select Switch
30
Turntable
31
Speaker Int. /Ext. Switch
32
Line Out Jack
33
External Speaker Jack
34
FM Wire Antenna
35
AC Power Cord
36
Line In ON/OFF
37
Line In Jack
Control Locators
22
23
24
30
29
22
37
36
31
32
33
34
25
26
27
28
35
5
Advertisement
Table of Contents
