Table of Contents
Advertisement
Problem
Network name or encryption
keys are forgotten
How to restore the system
to its default settings
6
RT-N1
• Try setting up the wired connection and
configuring the wireless encryption again.
• Press the Restore button at the rear panel of
the wireless router for more than five seconds.
• Press the Restore button at the rear panel of
the wireless router for more than five seconds.
• Refer to the section Restoring to the
default settings in Chapter 5 of this user
manual.
The following are the factory default settings:
User Name: admin
Password: admin
Enable DHCP: Yes (if WAN cable is plugged
in)
IP address: 19.168.1.1
Domain Name: (Blank)
Subnet Mask: 55.55.55.0
DNS Server 1: 19.168.1.1
DNS Server 2: (Blank)
SSID: default
Action
Chapter 6: Troubleshooting
Advertisement
Table of Contents
