Vivitar 410HD User Manual page 6

When powering the digital video camera ON for the first time, the camera takes you through the
INITIAL CAMERA SETUP.
Powering the Camera ON
1. Make sure the batteries have been inserted properly into your digital video camera.
Slide the battery cover on the front of the camera in a downward direction to open the
cover.
Insert 3x AAA (1.5v) batteries (not included) with the correct polarity, according to the
polarity illustrated inside the battery compartment.
Note: Alkaline batteries recommended.
2. Make sure an SD Memory card has been properly inserted into your camera.
The Memory Card slot is located on the side of your digital video camera.
Press the Memory card into the slot until a click sound is heard.
Note: After the camera is powered on, an SD icon appears on the LCD display.
If you do not see the SD icon on the display, please check if the card was inserted
properly.
3. Press the POWER
Setting the Camera Language
1. You will be prompted to select a language for the camera.
The Language selection menu will appear.
2. Select the language of your choice by pressing the UP or DOWN direction control
buttons.
3. Press the SET button to confirm the selection.
After selecting a language, the digital video camera opens with the Video Capture mode ready for
you to capture your videos.
button, on the side of the camera, to turn on the camera.
5