Vivitar 410HD User Manual page 19

5. To proceed with the format, select "Yes" and press the SET button.
You will be asked to confirm the formatting of the memory card.

Select "No" to exit without formatting.

Select "Yes" and press the SET button to begin the format.
The memory card will be completely formatted.
6. Press the MODE (M) button to exit the menu and return to your previous mode.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware
(Factory Default Setting) menu.
3. To reset the digital video camera‟s settings to the Factory Default Settings, press the SET
button to select „Default Setting‟.
 To proceed with the reset, select „Yes‟ and press the SET button to confirm.
The settings will be reset.
You will automatically exit the menu and return to the previous mode with the digital
video camera‟s settings set to the Factory Default Settings.
 To exit the resetting to the default settings, select „No‟ and press the SET button.
You will automatically exit the menu and return to the previous mode.
Note: After RESETTING to the default settings, it is recommended to select your system
language using the Video/Photo Capture Mode Menu. If you do not, the next time the digital video
camera is powered on, you will be prompted to select a system language.
18