Receiving Calls - Uniden EXI 8600 SERIES Owner's Manual

Receiving calls

4
Press
talk
base when the telephone call is finished.
The call time will be displayed for about
5 seconds.
AutoTalk when ringing
When the AutoTalk setting is on and there is an incoming call, simply lift the handset
from the base unit to answer the phone. (See page 27.)
Any key when ringing
When the AutoTalk setting is on, and the handset is off the base, press any handset
key (except
mute/ring
Mute when ringing
Press mute/ring
The handset rings normally with receipt of the next call.
Any key when paging
To cancel paging, press any of the handset keys while the handset is beeping. (See
page 26.)
Caller ID reception
When a call is received during a telephone call already in progress, the handset enters
call waiting mode and Caller ID data displays.
Press
flash
16
flash
mute/ring
or place the handset on the
) to answer the incoming call. (See page 27.)
when the phone rings to mute the ringing sound.
— Note: You must subscribe to Call Waiting service from your local
phone company to use this feature.
to switch to the new call. (See page 34.)
1
Phone rings.
Incoming Call
2
Press . "Talk" and volume
talk
appears on the display.
Talk
3
The call-time display starts. Talk with
the caller.
Talk 0:02
115:35