Installing The Dishwasher; Checking The Parts And Tools - Samsung DMT800 Series Installation Manual

installing the dishwasher

Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you're not at risk of injury when washing
dishes.
STEp 1 checkING The PArTS ANd TOOlS
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts required
Provided
2 Installation Brackets
Not provided
Power cable
Water supply line
Hose clamp
For the water supply line - Flexible stainless steel braided supply line or Minimum 3/8" O.D.
copper tubing with compression fitting. (Plastic tubing is not recommended)
A 90° elbow with 3/8" N.P.T. external pipe threads on one end, and sized to fit your water
supply line (copper tubing/compression fitting, or braided hose) on the other
6_ installing the dishwasher
installation_DD68-00046A-03_EN.indd 6
2 Flat Head Screws
(For the installation
(for the side walls)
bracket)
Twist on wire
connector
90° Elbow(3/8")
Air gap Rubber connector
2 Screws 2 Screws
(for the kick plate)
Electrical tape &
Strain relief
Standard duct tape
Teflon tape or sealing
®
Tube fittings
compound
2010-10-19 2:24:52