Related Manuals for Philips 19PFL3205H/12
Summary of Contents for Philips 19PFL3205H/12
- Page 1 Register your product and get support at www.philips.com/welcome 19PFL3205H/12 26PFL3205H/12 User manual...
- Page 2 France Türkiye 0800 261 3302 Şehiriçi arama United Kingdom General No: 0800 331 6015 free General National Rate No: National rate 0870 911 0036 Україна 0-800-500-697 This information is correct at the time of press. For updated information, see www.philips.com/support.
-
Page 3: Table Of Contents
Side connector Side controls and indicators Connect a computer Remote control Use a Conditional Access Module Use Philips EasyLink 4 Use your TV Use a Kensington lock Switch your TV on / off or to standby Switch channels 8 Product information... -
Page 4: Notice
This LCD product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or 2010 © Koninklijke Philips Electronics N.V. All bright points of light (red, green or blue) rights reserved. may appear constantly on the screen. - Page 5 Mains fuse (UK only) This TV is fitted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). Remove fuse cover and fuse.
-
Page 6: Important
Never expose the TV to rain or water. that can support the combined weight of Never place liquid containers, such as the TV and wall mount. Koninklijke Philips vases, near the TV. If liquids are spilt on Electronics N.V. bears no responsibility... - Page 7 Risk of injury, fire or power cord damage! Disposal of your old product and • Never place the TV or any objects on the batteries power cord. • To disconnect the TV power cord easily from the power outlet, ensure that you have full access to the power cord at all Your product is designed and manufactured times.
- Page 8 You can find detailed information on standby batteries’ on page 5). energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-efficient use. This TV was awarded...
-
Page 9: Your Tv
Remote control 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. This section gives you an overview of commonly used TV controls and functions. - Page 10 e Colour buttons GUIDE Selects tasks or options. Switches between channel grid and programme list. f AD (Audio Descriptor) (For RF Digital s SUBTITLE (For RF Digital TV only) TV only) UK only: Enables audio commentary for Enables or disables subtitles. the visually handicapped.
-
Page 11: Use Your Tv
4 Use your TV Note • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- on the side of the TV. This section helps you perform basic TV operations. Switch channels Switch your TV on / off or to standby •... -
Page 12: Watch Connected Devices
Watch connected devices Use teletext Note • Switch on the device before selecting it as a source on the TV. Use the source button Press MHEG/TELETEXT. » The main index page appears. Select a page as follows: • Press the Numeric buttons to enter a page number •... -
Page 13: Use More Of Your Tv
Rename devices from the 5 Use more of home menu your TV After adding a new device to the home menu, you can rename it to your preference. Access TV menus Press MENU. Press to select a device to rename. Menus help you to install channels, change Press OPTIONS. -
Page 14: Change Picture And Sound Settings
Change picture and sound • [Energy saving]: Applies low-energy settings. settings • [Natural]: Applies the best picture quality. Change picture and sound settings to suit your • [Custom]: Lists customised picture preferences. You can apply pre-defined settings settings. or change settings manually. Press OK to confirm your choice. - Page 15 • [Dynamic backlight]: Adjusts [Auto format]: (Not for brightness of the TV backlight to PC mode.) Automatically match lighting conditions. displays the suitable picture • [MPEG artifact reduction]: format. If not, widescreen is Smoothes out transitions on digital applied. pictures. You can switch this feature [Super zoom]: (Not on or off.
- Page 16 Use smart sound • [Balance]: Adjusts the balance of the right and left speakers. Use smart sound to apply pre-defined sound • [Audio language]: Available for digital settings. channels, when multiple languages are Press SOUND. broadcast. Lists available audio languages. »...
-
Page 17: Use The Universal Access Menu
Use the universal access Use advanced teletext menu features You can activate the universal access menu Access the teletext options menu during the first installation. Once enabled, you Access the teletext features through the can quickly access the visually impaired and teletext options menu. -
Page 18: Create And Use List Of Favourite Channels
Select T.O.P. teletext broadcasts View all channels Table Of Pages (T.O.P.) teletext broadcasts You can exit a favourite list, and view all allow you to jump from one subject to installed channels. another without using page numbers. T.O.P. When watching TV, press OK. teletext is not broadcast on all TV channels. -
Page 19: Use The Electronic Programme Guide
Remove a channel from a favourite Use EPG list When watching TV, press GUIDE. » The EPG planner screen appears. When watching TV, press OK. » The channel grid appears. Press MENU. » The program guide menu appears. Press to select a channel to remove. -
Page 20: Use The Tv Clock
Use the TV clock Change the clock mode Press MENU. You can display a clock on the TV screen. The Press to select [Setup] > clock displays the current time using time data [Installation] > [Clock] > [Auto clock received from your TV service operator. mode]. -
Page 21: Use Timers
Use timers Automatically switch the TV on (on timer) You can set timers to switch the TV to standby You can switch the TV to a specified channel at a specified time. at a specified time, from standby or power-on mode. -
Page 22: Use Tv Locks
Use TV locks Lock the TV for a specific time Press . You can prevent your children from watching Press to select [Setup] > certain programmes or channels by locking the [Features] > [Lock after]. TV controls. » You are prompted to enter your PIN code. -
Page 23: Use Subtitles
Select [On] to display subtitles always or Note [On during mute] to display subtitles only • Switch the TV off and on again for the change when audio is muted. to take effect. Press OK to enable subtitles. • If you use P +/- on your remote control to switch between channels, the locked channels Repeat this procedure to enable subtitles... -
Page 24: View Photos And Play Music From A Usb Storage Device
A slide show begins from the selected Caution photo. • Philips is not responsible if the USB storage Press the following buttons to control the device is not supported, nor is it responsible slide show: for damage or loss of data from the device. -
Page 25: Listen To Digital Radio Channels
Listen to music Disconnect a USB storage device In the USB thumbnail browser view, Caution select [Music] and press to enter. • Press GUIDE to switch between • Follow this procedure to avoid damage to your USB storage device. thumbnail and file browsing views. Press to select a music track or Press... -
Page 26: Update The Tv Software
Update the TV software Update using a USB device Connect your USB storage device to the TV. Philips continuously tries to improve its If the software update screen does not products and we recommend that you update appear automatically, select [Setup] >... -
Page 27: Change Tv Preferences
Change TV preferences Access decoder channel Use the preferences menu to customise your You can map channels provided through a TV settings. decoder or descrambler to your TV channel selection. In this way, you can select these Press MENU. channels by using the RC of your TV. The Select [Setup] >... -
Page 28: Start A Tv Demo
Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. Press DEMO on the remote control. Press to select a demo and press OK to view it. -
Page 29: Install Channels
Step 3 Install channels 6 Install channels Automatically installs the available analogue and digital TV channels and digital radio channels. The first time you set up your TV, you are prompted to select a menu language and to From the channel installation guide install TV and digital radio channels (if available). -
Page 30: Manually Install Channels
Manually install channels Press BACK when the new channel is found. This section describes how to search and store Press to select [Store as new analogue TV channels manually. channel] to store the new channel under a new channel number. Step 1 Select your system Press OK to enter [Store as new channel], then press OK. -
Page 31: Rename Channels
Rename channels Rearrange channels You can rename channels. The name appears After you install channels, you can rearrange the when you select the channel. order in which they appear. When watching TV, press OK to display When watching TV, press OK to display the channel grid. -
Page 32: Test Digital Reception
Test digital reception You can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Manual channel search]. Press to enter the menu. -
Page 33: Connect Devices
b EXT 2 (Y Pb Pr and AUDIO L/R) 7 Connect devices Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. This section describes how to connect devices with different connectors. Examples are provided in the Quick Start. -
Page 34: Side Connector
d EXT 1 (CVBS and RGB) Side connector Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. e SPDIF OUT Digital audio output to home theatres and other digital audio systems. SPDIF OUT a COMMON INTERFACE Slot for a Conditional Access Module (CAM). - Page 35 b AUDIO L/R f HDMI (Available only in 26 inch TV) Audio input from analogue devices Digital audio and video input from high- connected to VIDEO. definition digital devices such as Blu-ray players. c VIDEO Composite video input from analogue devices such as VCRs.
-
Page 36: Connect A Computer
Connect a computer • HDMI cable and HDMI-DVI adaptor Before you connect a computer to the TV • Set the screen refresh rate on your PC AUDIO IN/ PC IN(AUDIO) computer to 60Hz. • Select a supported screen resolution on your computer. -
Page 37: Use A Conditional Access Module
Use a Conditional Access Access CAM services Module After inserting and activating the CAM, press MENU. A Conditional Access Module (CAM) is Press to select [Setup] > provided by digital TV service operators to [Features] > [Common interface]. decode digital TV channels. »... -
Page 38: Use Philips Easylink
Your TV supports Philips EasyLink, which Note uses the HDMI CEC (Consumer Electronics • Do not enable Philips EasyLink if you do not Control) protocol. EasyLink-compliant devices intend to use it. that are connected through HDMI connectors can be controlled by a single remote control. -
Page 39: Use A Kensington Lock
Set TV speakers to EasyLink mode Use a Kensington lock When you play content from an EasyLink There is a Kensington security slot at the back compliant home theater, the TV speakers are of the TV. Prevent theft by looping a Kensington automatically muted. -
Page 40: Product Information
Supported multimedia file formats: Product information is subject to change • Images: JPEG without notice. For detailed product • Audio: MP3 information, go to www.philips.com/support. Note Supported display resolutions • Multimedia file names must not exceed 128 characters. Computer formats •... -
Page 41: Supported Tv Mounts
Supported TV mounts Product specification To mount the TV, purchase a Philips TV mount. Design and specifications are subject to change To prevent damage to cables and connectors, without notice. be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. -
Page 42: Troubleshooting
If the blinking reoccurs, contact There is poor TV reception from an antenna Philips Consumer Care. connection: You forgot the code to unlock the TV lock • Check that the antenna is properly feature connected to the TV. -
Page 43: Sound Issues
• Check that all cables are properly FAQs for this product at www.philips.com/support. connected. If the problem remains unresolved, contact Philips • Check that the volume is not set to 0. Consumer Care in your country as listed in the •... -
Page 44: Index
10 Index Conditional Access Module connect antenna 41, 34 connectors HDMI 41, 31 analogue overview fine-tune antenna content ratings country batteries 38, 5 bracket for wall mount decoder default settings demo devices care devices channel decoder add to home menu channel grid connect channels... - Page 45 factory settings menu favourites list language add to list main menu create list teletext view list universal access fine-tune channels MHEG teletext MPEG artifact reduction multimedia music HDMI 41, 31, 32 digital radio hearing impaired home mode with slideshow mute TV speakers install channels automatic manual...
- Page 46 radio Table of Pages rearrange channels technical specifications reception 30, 40 teletext recycle features register product menu remote control subpages batteries 38, 5 Table of Pages overview technical specifications timer rename channels on timer reorder channels sleep timer resolution standby restore default transmission 38, 40...
- Page 48 To find out on how to re-tune your TV,check the user manual online for details...
- Page 49 © 2010 Koninklijke Philips Electronics N.V. All rights reserved.