Specifications - JVC RX-6010VBK Service Manual

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/DIN):
Frequency Response (8 Ω):
Video
Video Input Sensitivity/Impedance:
Composite video:
Video Output Level:
Composite video:
Synchronization:
Signal-to-Noise Ratio:
29
Output Power
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels:
(* Measured on AC 110 V, 127 V, 220 V and 240 V)
CD, TAPE/CDR, TV SOUND, VCR, DVD: 220 mV/47 k Ω
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD):
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR:
CD, TAPE/CDR, TV SOUND, VCR, DVD: 87 dB/67 dB
CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (±1 dB)
Tone Control: Bass (100 Hz):
Treble (10 kHz):
VCR, DVD:
VCR, MONITOR OUT:
Negative
45 dB
100 W* per channel, min. RMS, both channels driven into 8 Ω at
1 kHz with no more than 0.9% total harmonic distortion.
(IEC268-3/DIN)
100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
100 W*, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz, with
no more than 0.8% total harmonic distortion.
0.5 V (p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
±10 dB
±10 dB
1 V (p-p)/75 Ω
1 V (p-p)/75 Ω