Basic Recording - JVC hr-xvs30ek Instructions Manual

Dvd player & video cassette recorder
Hide thumbs Also See for hr-xvs30ek:
Table of Contents

Advertisement

Basic Recording

● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The unit's power comes on automatically and the counter is
reset to 0:00:00.
B
Select the S-VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press p. The current setting appears on the front
display panel or TV screen. Press p again to change
the setting while the tape speed is displayed on the TV
screen.
● In EP mode, the recording time is extended three times.
● If you record a programme in EP mode on the unit, it is
recommended to play back the EP-recorded tape on the unit.
E
Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the unit.
● If "O.S.D." is set to "ON" (
screen while an index code is being marked.
● When "DIRECT REC" is set to "ON" (
any button just after pressing 7 on the unit (or 7 and 4 on
the remote control), the unit may not function properly.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
pg. 23)
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded. (
F
Pause/Resume recording.
Press 9. Press 4 to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press 8. Then press x on the S-VHS deck to remove the
cassette.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
recording will resume automatically when power is restored
to the unit unless the unit's memory backup has expired.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
21
pg. 65), "MARK" blinks on the
pg. 65), if you press
pg. 65)
pg. 21, 22, 26), the
Record safety tab

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents