Tests; Figure 6.3 Test Flowchart - Fujitsu MAU3147RC Product/Maintenance Manual

6.2.6

Tests

This disk drive can be tested in the following ways:
•
Initial seek operation check (See Subsection 6.3.1)
•
Operation test (See Subsection 6.3.2)
•
Diagnostic test (See Subsection 6.3.3)
Figure 6.3 shows the flow of these tests.
Start
Start self-test by
turning the power on
Test results OK?
Yes
Execute an operation
test using a host
computer or test
equipment
Test results OK?
Yes
Continue operation
C141-E222
No
Check host system
(Table 6.2)
Host system
normal?
Replaced or repair
disk drive
No
Disk drive
normal?
Execute diagnostic
test using a host
computer or test
equipment
Test results OK?
Test using voltage or
temperature stress
Test results OK?
Normal
Figure 6.3 Test flowchart
6.2 Maintenance Information
No
Analyze system-related
error
Yes
No
Yes
No
Yes
No
Analyze disk drive
error (Table 6.3)
Yes
6-9