Invacare ISP2000 User Manual page 8

REASSEMBLY
Nasal Mask
Nasal Mask
Channel
Cushion Ribbing
FIGURE 3 - DISASSEMBLING/REASSEMBLING THE
NASAL CUSHION TO THE MASK SHELL
NOTE: Ensure the nasal cushion is COMPLETELY seated in the channel
before use. When properly assembled, the nasal cushion and mask shell
should form a smooth, continuous surface.
5. After the nasal mask cushion is securely reassembled, rinse the
entire mask thoroughly and allow to air dry out of direct sunlight.
NOTE: Make sure the mask is dry before use. Inspect the mask after
cleaning.
Replace the mask if any parts are damaged or
deteriorated.
Nasal Mask
Channel
Cushion Ribbing
CAUTION
8
Nasal Mask
Cushion