DSL-G604T Wireless ADSL Router Manual
the LAN. The Lease Time field is the time the Server will set for devices using DHCP to re-request
an IP Address. When using the Router in DHCP mode you may also configure DNS settings for the
LAN. Click the DNS Mode radio button to auto to allow the Router to automatically relay DNS
settings to properly configured DHCP clients. Click Manual to manually enter the Primary and
Secondary DNS IP addresses. When the Router has been enabled as DHCP Server the administrator of
the server can assign a Static IP address to each computer on the LAN from the workstation where the
DCHP server has been enabled. To assign a Static IP address to a computer on the LAN, enter the IP
and MAC address in the Static IP Assignment field. Click Apply to implement information set in this
table.
DNS
DNS or Domain Name Server is a system that translates Domain Names into IP addresses. Setting up
a DNS will allow the router to contact the DNS to ask it to translate and find a web site you have
entered. The following window allows you to set two DNS servers by their IP addresses and these IP
addresses should be supplied to you by your ISP.
Figure 4- . DNS window
59