Table of Contents
Advertisement
To set up custom TCP or UDP port forwarding rules, follow these steps:
1. Select the User category and click the Add button located below the Available Rules list. This will
change the menu to look like the example below.
2. Type a Rule Name in the space provided.
3. Select the port Protocol from the pull-down menu - you may select TCP, UDP or both (TCP/UDP).
4. Configure a single port or a range of ports for forwarding. Type the lowest numbered port in the range
in the Port Start space. Type the highest numbered port in the Port End space. For a single port, just
enter the same number in both spaces.
5. Type a number for the Port Map in the space provided. This is the local port being forwarded to.
6. Click the Apply button to create the new rule. The new rule will appear listed in the table of custom
port forwarding rules.
DSL-562T ADSL Router User's Guide
Figure 4- 6. Port Forwarding User Rules Management
40
Advertisement
Table of Contents
