Cisco MDS 9100 Series Hardware Installation Manual page 22

Installing Cisco MDS 9134 48-Port and 64-Port Bundles
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In both types of above-mentioned switch configurations, the distance between the 10-Gbps ports of the
switches can be a maximum of 1 meter. Currently, only 1-meter cables are shipped with the boxes.
Ensure that a copper X2 CX4 transceiver is plugged into the 10-Gbps port of each switch.
Step 3
Plug in one end of the copper cable in the same box that is supplied to the 10-Gbps transceiver of the
Step 4
MDS 9134 Switch. Plug in the other end to the 10-Gbps transceiver of the MDS 9134 Switch from the
second box in order to connect the two MDS 9134 Switches.
Figure 2-18
Cisco MDS 9100 Series Hardware Installation Guide
2-22
Installing the MDS 9134 48-port and 64-port Bundles
Chapter 2 Installing the Cisco MDS 9100 Series
OL-21514-01