Advertisement
•
Place heat tents over burners by inserting tabs into slots in front of firebox. Opposite
10
ends of heat tents rest on pins in back of firebox.
•
Place cooking grates onto grate rests.
11
•
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Swing Away is installed upside-down.
•
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
Pivot Wire
Swing Away
Leg Wire
-
+
AA Battery
Pin
Cooking Grate
463320708 • 21
Advertisement
