Alvarion BreezeMAX Extreme System Manual page 63

Chapter 2 - Installation
2.3.3 Installation the BTS on a 4" (or more) Mast
Using the tilt extension, and heavy duty metal bands.
Assemble the tilt extension on the BTS and fasten its three screws (see
1
"Assembling the Tilt Extention on the BTS" on page
Thread the metal strips through the BTS carriage (see
2
3 Attach the carriage to the pole and fasten the metal strips (see
Thread screws through the middle-side holes of the carriage (see
4
Hang the BTS with the tilt extension on the middle screw of the tilt bracket.
5
6 Attach and fasten all the screws at both sides of the tilt bracket (see
Figure
7 If required, assemble the external antennas at the top of the rasdio-headby
screwing them in.
BreezeMAX Extreme
Figure 2-7: Installed Carriage - Side View
2-8).
56
Mounting the BTS
52).
Figure 2-7).
Figure 2-7).
Figure 2-7).
Screw
System Manual