Connect Interface Ports - Cisco 8100 Series Hardware Installation

Connect Interface Ports

Figure 15: Installing the QSFP Transceiver Module
Step 6 Press firmly on the front of the transceiver module with your thumb to fully seat the transceiver in the module's transceiver
socket (see the below figure).
Caution If the latch isn't fully engaged, you might accidentally disconnect the transceiver module.
Figure 16: Seating the QSFP Transceiver Module

Connect Interface Ports

You can connect optical interface ports with other devices for network connectivity.
Hardware Installation Guide for Cisco 8100 Series Routers
30
Connect Router to the Network