Before Use - Panasonic EH-HV51 Operating Instructions Manual

Before Use

Attaching and removing attachments
■ Attaching
1. Holding the attachment
as illustrated.
2. Press the attachment in
along the groove on the
Press Plate side until you
hear a click.
■ Removing
Press the Push Button (H),
and pull out the attachment
while holding the attachment
as illustrated.
►Note
• Do not touch the heated sections such as Iron Plates when
attaching or removing attachments.
EH-HV51_CIS(EN).indb 11 EH-HV51_CIS(EN).indb 11
Heating the Iron Plate
1
Insert the plug into the power outlet.
1
2
2 Press and hold the Power Switch (D) to turn on
the straightener. (see page 9)
• The Illumination Lamp (B) glows.
3
3 Set a temperature by using the Temperature
Level Adjustment Switches (C) according to
the characteristics and condition of your hair.
• When you use the straightener for the fi rst time, be sure
to set the temperature level to 140.
Indicator Temperature
230
Approx. 230 °C
200
Approx. 200 °C
180
Approx. 180 °C
160
Approx. 160 °C
140
Approx. 140 °C
• Confi rm that the LED Temperature Level Display (I)
has changed.
►Notes
• A temperature level of more than 200 is high and may
damage your hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
• After switching on, the straightener reaches operating
temperature (approximately 100 ˚C) after about 15
seconds.
• The time taken to reach operating temperature may
vary depending on the operating environment.
Hair type Hair Condition
Thick Less damaged
Fine Damaged
11
23/03/2015 08:48:59 AM 23/03/2015 08:48:59 AM