How To Initialize The Dvd Recorder - Philips DVDR3475/37 Service Manual

HOW TO INITIALIZE THE DVD RECORDER

To put the program back at the factory-default,
initialize the DVD recorder as the following procedure.
1. Turn the DVD recorder on.
2. Confirm that no disc is loaded or that the disc tray
is open. To put the DVD recorder into the Version
display mode, press [SKIP], [1], [2], and [3] buttons
on the remote control in the order.
Fig. a appears on the screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION DISP
MODEL NAME :
FE VERSION :
BE VERSION :
TT VERSION :
DV UNIQUE ID :
LD ADJUSTMENT :
DISC ADJUSTMENT :
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. a Version Display Mode Screen
3. Press [OK] button, then the DVD recorder starts
initializing. When the initializing is completed, the
DVD recorder exits the Version display mode and
turns off the power automatically.
* To move into the Normal mode from the
Version display mode, press [BACK] button on
the remote control instead of [OK] button.
* When [ ] button is pressed before [OK]
button is pressed, the DVD recorder exits the
Version display mode, then the power turns
off.
All manuals and user guides at all-guides.com
*****
R40_***_***
RL4P*****S1E
T4****RDU
******** ********
OK
OK
1-8-1 E7E4AINT