Advertisement
e Setup & Use f Installation et utilisation S Preparación y uso
7
5
1
4
3
e
IMPORTANT! Test sound reception of this monitor before first
6
time use and whenever you change location of transmitter
(see page 8).
1
1. Set transmitter channel switch to same channel as receiver.
2. Place transmitter in same room with child. Point microphone
directly toward crib or play area.
3. Unwrap and fully extend AC adaptor cord for best transmission.
Insert AC adaptor jack into transmitter socket and plug into
wall outlet.
4. Slide transmitter power switch to turn power on. Power
indicator lights.
5. Clip receiver to your clothing, where you will feel vibrations.
Or, place the receiver in your pocket.
6. Rotate receiver power/volume dial to turn power on.
Power indicator lights. Rotate power/volume dial to adjust
volume (if you want to hear sounds).
7. Press the vibrations button. Vibrations ready indicator lights.
Hint: Under permitting conditions, the receiver receives sounds (and
you will feel vibrations) up to 850 feet (300 meters) away from baby.
14
14
e"Wah, Wah, Wah..."
f«Ouin, ouin, ouin...»
S"Wah, Wah, Wah..."
2
Advertisement
