Track List; Scroll Rate - Excalibur 501 User Manual

Press the t key to
decrease the number.
DOWN
Press key for
next digit (enters the number
ENTER
if at last digit).
Press key to
select another digit.
PREV
Valid entries are 0-9.
None:
Selecting this menu item
resets track length to 0.000
and displays:
NO TRACK
LAP SPEED
OFF

Track List:

Selecting one of the
NASCAR tracks will enter
®
that track's length.
Small Text:
This feature allows you to
view 16 characters of text on
a line compared to the un-
compressed 10 characters of
text on a line.
When the unit is first
turned on, has a
default setting of .
SMALL TEXT
ON
Press key to tog-
gle feature
ENTER
.
SMALL TEXT ON
OFF

Scroll Rate:

This menu item will allow
you to change the scrolling
speed of the text to one of
eight levels. Press
key to scroll through the set-
ENTER
tings.
Contrast:
This menu item will allow
you to change the contrast of
the LCD display to one of
eight levels. Press
key to scroll through the set-
ENTER
tings.
16
or
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable l
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
17