Kenwood DDX9018S Instruction Manual page 9

■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For details of, see Camera Setup (P.53).
■ [DEMO]
Set the demonstration mode. Default is "ON".
1 Touch [DEMO] and select ON or OFF.
[3way X'over]
■
Displays the message screen.
For detailed operation, see 3 way speaker
system setup (P.63).
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.57).
Security Code Setup
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be deactivated. Note that the Security
Code can be set with a 4 to 8 digit number of
your choice.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP Menu screen appears.
h
3
Touch [Security].
].
h Security screen appears.
4
Touch [Security Code Set] on the Security
screen.
h Security Code Set screen appears.
5
Enter a security code with 4 to 8 digits
and touch [Enter].
6
Enter the same code again and touch
[Enter].
Now, your security code is registered.
NOTE
• Touch [BS] to delete the last entry.
• If you enter a different security code, the
procedure returns to step 5 (for first code entry).
• If you have disconnected the Receiver from the
battery, enter the correct security code as that
you have entered in step 5 and touch [Enter]. You
can use your receiver.
To change the security code:
1
Touch [Security Code Change] on the
Security screen, then repeat step 5 and 6.
To clear the security code:
1
Touch [Security Code Cancellation] on
the Security screen, then repeat step 5.
h
h
Basic Operations
9
English