Fe/Ge Cable - Huawei BTS3902E WCDMA Hardware Description

BTS3902E WCDMA
Hardware Description
Figure 3-11 FE/GE fiber optic cable
(1) DLC connector

3.6 FE/GE Cable

The fast Ethernet or gigabit Ethernet (FE/GE) cable transmits FE/GE signals between a
BTS3902E and a transmission device. This cable is optional, and the maximum length of a FE/
GE Cable is 20 m (65.62 ft).
Exterior
The FE/GE Ethernet cable is a shielded straight-through cable with an RJ45 connector and round
connector at one end and an RJ45 connector at the other end, as shown in
Figure 3-12 FE/GE cable
(1) RJ45 connector
Pin Assignment
Table 3-14
Table 3-14 Pin assignment for the wires of the FE/GE cable
Pin on the RJ-45
Connector
X1.2
X1.1
X1.6
X1.3
Issue 09 (2014-05-16)
NOTE
The FE/GE cable can be used between two devices for a distance of less than 100 m (328.08 ft).
describes the pin assignment for the wires of the FE/GE cable.
Wire Color
Orange
White and orange
Green
White and green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Round connector
(2) Round connector
Wire Type
Twisted pair
Twisted pair
3 BTS3902E Cables
Figure 3-12.
Pin on the RJ-45
Connector
X2.2
X2.1
X2.6
X2.3
26