Panasonic SA-DT310 Operating Instructions Manual page 24

Using GUI (Graphical User Interface) screens
Unit information
Audio menu
Double re-master [RAM] [DVD-A] [DVD-V] [CD] [WMA] [MP3]
1
(➡ page 29)
Dialogue Enhancer on/off [DVD-V]
(Discs where the dialogue is recorded in the center
2
channel)
This makes the dialogue in movies easier to hear.
Display menu
e.g.) [For\Southeast\Asia,\Australia\and\N.Z.]
x1.00
Normal
1 2
[For\Southeast\Asia,\Australia\and\N.Z.]
4:3 Aspect [RAM] [DVD-A] [DVD-V]
Select how to show images made for 4:3 aspect screens
on a 16:9 aspect television.
≥Normal: laterally stretches images made for a 4:3
screen.
1 ≥Auto: expands suitable 4:3 letterbox images to fill more
of the screen. Other images appear in full in the center of
the screen.
≥Shrink: images appear in the center of the screen.
≥Zoom: expands all images to fill the screen.
If your television has a similar feature, use it instead for a
better effect.
2 Zoom [RAM] [DVD-A] [DVD-V]
Subtitle Position/Brightness [DVD-A] [DVD-V]
≥Position (0 to s60): in 2 unit steps
3 ≥Brightness (Auto
The brightness adjusts automatically against the
§
background.
Bitrate display on/off [RAM] [DVD-A] [DVD-V]
During play: shows the bitrate(approximate values) of the
video being played
While paused: shows the data volume of the frame and
9.438 Mbps
4
[2, 1]
Bit rate
Cur. 7.507 Mbps
Ave. 6.730 Mbps
Current bitrate
Average bitrate
OSD brightness (s3 to i3)
5
Adjust the brightness of the on-screen displays.
24
RQT6924
All manuals and user guides at all-guides.com
OFF
OFF/48kHz
2
1
0 0 0
OFF
3 4 5
[VCD] [JPEG]
[VCD]
(➡ page 18)
/0 to s9)
§
[VCD]
type of picture (➡ page 37, Glossary–
I/P/B)
5.0
Mbps
A record of bitrates for
a sample period.
Picture menu
23: [For\Southeast\Asia,\Australia\and\N.Z.]
Picture mode [RAM] [DVD-A] [DVD-V]
≥N: Normal mode
≥S:
1
≥F:
≥C1: Mellows images and enhances detail in dark scenes
≥C2: Sharpens images and enhances detail in dark scenes
≥U1/U2/U3: User mode (➡ below)
Video output mode [RAM] [DVD-A] [DVD-V]
2 ≥480I: Interlace video
≥480P: Progressive video ("PROGRESSIVE" is on)
Transfer mode [RAM] [DVD-A] [DVD-V]
Select the method of conversion for progressive output to
suit the type of material being played.
3
≥Auto 1 (normal): for viewing film material
≥Auto 2: for viewing film material (the same as Auto 1,
but able to convert 30-frame-per-second progressive video)
≥Video: for video material
To change the user mode
1 Select User mode and press [1] to highlight the number.
2 Press [3, 4] to select "1", "2" or "3".
U3: [For\Southeast\Asia,\Australia\and\N.Z.]
U1: MPEG D.N.R. (Digital Noise Reduction)
U 1
1
Depth Enhancer (0 to i4)
4
Reduces the rough noise in the background to give a
greater feeling of depth.
3D-NR (0 to i4)/Dot NR (On)
5
Reduces overall noise/Reduces the dot noise that occurs
[ at the borders between colors.
Block NR (0 to i3)
6
Smoothes block noise.
Mosquito NR (0 to i3)
7
Reduces the smudging that appears around contrasting
sections of the picture.
U2
Contrast (s7 to i7)
8 Increases the contrast between light and dark parts of the
picture.
Brightness (0 to i15)
9
Brightens the picture.
Sharpness (s7 to i7)
:
Adjusts the sharpness of the edges of the horizontal lines.
Color (s7 to i7)
;
Adjust the shade of the picture's color.
Gamma (0 to i5)
<
Emphasis of outlines.
U3
480
Only when "PROGRESSIVE" is on
[VCD]
Soft mode (Soft picture with fewer video artifacts)
Fine mode (Details are sharper)
[VCD]
0 0 0 0
4 5 6 7
0 0 0
U2
1 8 :
9
480
Only when "PROGRESSIVE" is on
1—3 (➡above)
[JPEG]
[VCD] [JPEG]
U 1
0 0
;
<