Change The Ntp Server; Specify Readydlna Media Server Settings - NETGEAR Nighthawk RAX80 User Manual

Change the NTP Server

By default, the router uses the NETGEAR NTP server to sync the network time. You can change
the NTP server to your preferred NTP server.
To change the NTP server to your preferred NTP server:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Administration > NTP Settings. The NTP Settings page displays.
4. Select the Set your preferred NTP server radio button.
5. Enter the NTP server domain name or IP address in the Primary NTP server field.
6. Click the Apply button.
Your settings are saved.

Specify ReadyDLNA Media Server Settings

By default, the router acts as a ReadyDLNA media server, which lets you view movies and photos
on DLNA/UPnP AV-compliant media players, such as Xbox360, Playstation, and NETGEAR media
players.
To specify media server settings:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > USB Functions > ReadySHARE Storage > Media Server. The Media Server
(Settings) page displays.
4. Specify the settings:
Manage Your Router
Nighthawk AX8 8-Stream AX6000 WiFi Router
102 User Manual