Advertisement
GETTING TO KNOW YOUR DEEP FRYER
1.
Body
2.
Body Handle
3.
Bracket
4.
Oil Container
5.
Heating Element
6.
Adjustable Temperature Control
7.
Temperature Indicator Light
8.
Power "ON" Indicator Light
9.
On/Off Switch
10. Thermostat
Technical Specifications
Voltage:
120V., 60Hz.
Power:
1700 Watts
Oil Capacity:
5.5 Liters
11. Limitation Thermostat
12. Detachable Filter
13. Lid Handle
14. Window
15. Fryer Lid
16. Large Frying Basket
17. Fryer Handles (x3)
18. Small Frying Basket (x2)
19. Magnetic Power Cord Socket
20. Control Panel With Heating Element
21. Heater Clip
2
OPERATING INSTRUCTIONS cont.
Cleaning Instructions
Warning:
Always remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
• Follow the cleaning instructions on
page 3. (Before using for the First
Time)
• Never immerse the control panel, cord
or plug in water or any other liquid.
• Do not place the control panel, cord or
plug in the dishwasher.
• Clean the control panel only with a
damp cloth.
• The oil container, frying basket, lid
cover and filter can be washed in the
dishwasher.
• The body of the deep fryer can be
washed in warm soapy water. Do not
put the body of the deep fryer in the
dishwasher.
• Any other servicing should be
performed by EURO-PRO Operating
LLC.
Detachable Magnetic Power Cord
Your
Deep Fryer has been
specifically designed with your safety in
mind.
has incorporated a
unique detachable power supply cord.
This power supply cord cord is
designed to "Break Away" from the fryer
body in the event that the supply cord is
inadvertently pulled. This is intended to
prevent the tipping of the appliance and
hazardous spillage of hot oil.
The female receptacle portion of the
power supply cord is permanently
attached to the rear of the the control
panel.
To connect the male power cord plug to
the female receptacle on the appliance,
orient the male plug so that it mates
with the female receptacle. The male
plug can only be inserted one way. If
the male plug will not go into the
receptacle on the appliance, rotate the
male plug 180°
IMPORTANT: Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
7
Advertisement
