Honda TRX420FA 2009 Owner's Manual page 204

If You Have a Flat Tire
Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Loosen − but do not remove
3. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
Avoid getting grease, oil, or dirt on the front brake disc or pad surfaces
when removing and installing each wheel. Any contamination can
cause poor brake performance or rapid pad wear after reassembly.
Taking Care of the Unexpected
196
on page 95
(1)
− the wheel nuts ( ).
.
(1)
(2)
(2) wheel rim
1