Honda TRX420FA 2009 Owner's Manual page 199

Manual Shift (ESP) Mode:
If the gear position indicator shows '' '' or blinks, rock the vehicle
back and forth and make sure the gear position indicator is displayed
properly.
If one or both shift switches do not function, stop riding your ATV in
the ESP (manual shift) mode. Switch to riding in the AUTO (automatic
shift) mode.
Have your ATV inspected by your Honda dealer.
When the engine is running:
1. Stop the ATV.
2. Turn the ignition switch to the OFF (
3. After the engine stops, turn the ignition switch to the ON (
position.
4. Press both shift switches and check that they are functioning.
5. If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
Selection & Operation,
When the engine is stopped and the ignition switch is ON:
1. Turn the ignition switch to the OFF (
2. Turn the ignition switch to the ON (
3. Press both shift switches and check that they are functioning.
4. If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
Selection & Operation,
When the battery is low (or dead):
See If the Battery Is Low (or Dead),
If the Transmission Is Not
Functioning Properly
−
page 192 .
page 192 .
Taking Care of the Unexpected
) position.
Emergency Gear
) position.
) position.
Emergency Gear
page 207 .
)
191