Table of Contents
Advertisement
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 73).
NOTES
• To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 133).
• When using the 2nd camera, set [AV Input] to [Camera] (page 122).
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Reverse Gear Setting].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.
Menu Item
[Camera View]
[On] [Off]
[Back Camera Input]
[Off] [On]
[2nd Camera Input]
[Off] [On]
[Reverse Gear Setting]
[Battery]
Description
Set to [On] to display camera view at all times. (The same
mode is turned on when
view screen. The setting value is synchronized.)
NOTES
• To set the rear view camera as the camera for Camera View
mode, set [Back Camera Input] to [On] (page 133).
• When using the second camera, set [AV Input] to [Camera] or
[2nd Camera Input] to [On] (both settings are synchronized)
(page 133).
TIP
You can also turn this function on by touching [Camera View] on
the AV source selection screen or in the source list.
Setting the second camera activation (front camera, etc.).
Setting rear view camera activation.
Setting the second camera activation (front camera, etc.).
This function is synchronized with [AV Input] setting.
Setting the polarity of the rear view camera.
The polarity of the connected lead is positive.
- 133 -
is touched on the camera
Advertisement
Table of Contents
