Advertisement
Quick Links
MFP64FM
Full Motion
This TV Wall Mount allows you to move
your TV at all angles and extends out
up to 52cm from your wall
Compatible TV Size
This TV Wall Mount fits 37-80"
37-80"
(94-203cm) TV Screens
Maximum Mounting Pattern
This TV Wall Mount has a mounting
600x400
hole pattern up to 600x400mm (WxH)
mm
Maximum TV Weight
HOLDS
This TV Wall Mount supports TVs
50
kg
weighing up to 50kg
Hardware Kit Contents
ITEM DESCRIPTION
A
M4 x 12mm Bolt
A
M4 x 30mm Bolt
B
M5 x 12mm Bolt
B
M5 x 30mm Bolt
C
M6 x 12mm Bolt
C
M6 x 30mm Bolt
D
M8 x 16mm Bolt
D
M8 x 30mm Bolt
Tools Required
DRYWALL INSTALLATION (TIMBER SUPPORTS):
• Adjustable spanner/socket set
• Philips head screwdriver
• Power drill
• High speed 3mm drill bit
• Pencil
SAFETY FIRST
1. Installation of this TV Wall Mount will be easier with two people.
2. Some images in this guide may vary slightly from the actual
components supplied.
3. Ensure this instruction manual is completely read and
understood before attempting installation.
4. This TV Wall Mount MUST NOT be installed solely in
plasterboard, fibre cement and similar surfaces.
5. This TV Wall Mount MUST be installed in sound supporting
structures such as those made of timber, steel or masonry
using appropriate fasteners.
6. The supporting structure must be capable of sustaining
the combined weight of the TV Wall Mount and the display
otherwise the structure must be reinforced.
7. The fasteners supplied in this hardware pack allow for fixing
into timber and masonry only. If installing into a supporting
structure made of steel, appropriate fasteners must be used
and sourced from an appropriate supplier.
8. Use appropriate tools and safety equipment and ensure
adequate ventilation during installation.
9. If uncertain about any aspect of installation, contact
The Crest Company or an installation professional.
10.
Please retain these instructions for future reference.
QTY
ITEM
DESCRIPTION
E
Washer ø18x6.5x1.5
4
E
Spacer 18x8x20
4
F
Washer ø20x8x1
4
4
F
M8x60 Lag Bolt
4
F
Concrete Anchor ø10x50
4
Wall Mount
4
Mounting Arm
Spirit Level
4
MASONRY INSTALLATION:
• Adjustable spanner/socket set
• Philips head screwdriver
• Power drill with hammer function
• 10mm Masonry drill bit
• Pencil
QTY
4
4
8
8
8
1
2
1
Advertisement
Related Manuals for Crest Audio MFP64FM
Summary of Contents for Crest Audio MFP64FM
- Page 1 SAFETY FIRST MFP64FM 1. Installation of this TV Wall Mount will be easier with two people. 2. Some images in this guide may vary slightly from the actual components supplied. 3. Ensure this instruction manual is completely read and understood before attempting installation.
- Page 2 Using Spirit Level Use the supplied spirit level to level your TV Wall mount before installation. Step 1: Attach Wall Plate to Wall A. INSTALLING IN DRYWALL (TIMBER FRAME) WARNING: If attaching this TV Wall Mount using this method, you MUST spread the wall plate across 2 wall studs. Wall studs can be 450mm or 600mm apart depending upon the position of the wall and the geographical state you live in.
- Page 3 Option Option Figure 3 Step 3: Hook Arms over Wall Plate 1. Using a second person for assistance, carefully lift the TV and hook it over the top of the wall plate. 2. Tighten the two Safety bolts by using a Phillips head screwdriver to secure the bracket (see Figure 4). 3.
- Page 4 Step 4: Full Motion Adjustment & Maintenance 1. You can now adjust your TV to the desired viewing angle. 2. If your Wall Mount is too loose and moves around too easily or vice versa (too tight) please tighten or loosen as required. WARNING: Do not loosen too much as the Wall Mount may fall apart.