Troubleshooting; Problems And Solutions; Sending; Document Jam - Epson PriorityFax 3000 Owner's Manual

5 Troubleshooting

Problems and
Solutions

Sending

This chapter discusses problems you may encounter and their
likely solutions.
This section includes five categories: sending receiving, copying,
telephoning, and LCD error messages.

Document jam.

• Push down on the cover release button to open up the fax
machine. Remove the jammed document. Push the cover back
in place until you hear a click Make a copy of the jammed
document, and send the copy.
Document doesn't enter the feeder
The cover may not be closed securely. Push down on the cover
•
until you hear a click.
The document's left edge is not aligned with the document
•
guide. Open the paper cover to remove the document and
then push it closed until you hear a click. Align the document
with the document guide.
The documents may be too thick or too thin. (From 0.055 mm
•
to 0.12 mm is the recommended range of document thickness.)
Use a copier other than the fax machine to reproduce the
original document. Then send the copy.
The documents may be wrinkled, wet, curled, or tom. Use a
•
copier other than the fax machine to reproduce the document.
Then send the copy.
The documents may be too small. Use a copier other than the
•
fax machine to reproduce the original document. Then send
the copy.
Multi-page documents on some types of paper, such as
•
bond paper, may need to be fed one page at a time.
properly.
5-1