Chapter 4 Using Print Image Framer (P.i.f.); Taking Photos With Frames - Epson PhotoPC L-500V Reference Manual

Chapter 4
Using PRINT Image Framer (P.I.F.)
PRINT Image Framer (P.I.F.) lets you combine your photos with fun frames to create original
greeting cards and keepsakes. Four frames are already stored in your camera, and over 100
additional frames are available on the CD that came with the camera. You can use the PRINT
Image Framer Tool to copy the frames from the CD to your camera.
You can also modify the frames or create original frames using PIF Designer. First, you need to
install PIF Designer, PRINT Image Framer Tool, and the P.I.F. frames on your computer. See your
Camera Basics book for instructions.

Taking Photos With Frames

You can use PRINT Image Framer to take pictures with a variety of frames for holidays and special
occasions. You can then print your framed pictures directly from the camera to supported Epson
printers. For instructions, see "Using Direct Print" on page 61. (You cannot print photos with P.I.F.
frames from your computer.)
Note:
If you have the Epson Stylus Photo RX500, you can print photos taken with P.I.F. frames by removing the
camera's memory card, inserting it into the correct RX500 memory card slot, and printing using the RX500
control panel buttons. See page 61 and the RX500 documentation for instructions.
57
Using PRINT Image Framer (P.I.F.)