Vax MACH2 VZL-6012 Instruction Manual page 5

Bagless upright
Hide thumbs Also See for MACH2 VZL-6012:
Table of Contents

Advertisement

Floor/Carpet Cleaning
Move the handle and adjust it to the desired position for
(a) storing the upright, (b) operating the cleaner, and (c)
de-press the handle release pedal again to clean under
furniture. NOTE: Brushbar could cause rug fringe area to
become tangled within cleaner. Use caution when
vacuuming throw rugs with fringe.
Fig.4/5
Above Floor Cleaning
Cleaner must be in its upright position to raise brushbar.
Turn carpet height adjuster to long carpet pile setting.
Fig.4/6
Press handle/extension wand release button and pull
handle/extension wand up to remove.
Fig.4/7
Pull hose end out of lower hose and remove the hose
from the hose guide (Fig.4/8).
Fig.4/8
All manuals and user guides at all-guides.com
a
b
c
To change the dusting brush into an upholstery tool,
simply snap off the square plastice ring housing the
bristles. To return to dusting brush for delicate surfaces
(and stowable form) simple push the ring back into place
until you feel a snap
Extension Wand
Lift wand cap to attach hose to handle/extension wand
(Fig.4/9).
Fig.4/9
Choose any of the handy accessories or use the
extension wand alone (Fig.4/10).
Fig.4/10
Simply push the attachment
firmly onto the end of the
extension wand. To remove
tool, twist and pull apart
gently.
The TurboTool is ideal for
lifting pet hair off carpets,
stairs and upholstery. The
TurboTool is most effective
when using backward
strokes over the area that
is being cleaned.
Carry Handle
Use the carry handle located
on the top of the dirt
container lid to move the
cleaner from room to room.
Vax Careline
0870 606 1248
Fig.4/11
Fig.4/12
5
how to operate

Advertisement

Table of Contents
loading

Table of Contents