Samsung 5 Series Quick Setup Manual page 2

Remote Control Buttons and Functions:
Press number buttons for direct access to channels.
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Use these buttons to select On Screen Menu items and
Colored buttons for use in the
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
The Picture Modes are listed and described in the table below:
Mode
Brightens picture. For a vibrant, enhanced image in brightly lit or
Dynamic
sunny room.
Standard For a bright, detailed picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
Turn on your TV.
1.
2. Using your remote, press the
Then, select Picture → Mode.
On the Picture Mode menu, use the ◄ or ► on your remote to select
3.
the Picture Mode you want.
4. Press the ExIT button to exit the menu.
All manuals and user guides at all-guides.com
Turns the TV on and off.
Adjust the volume.
View the Media Play.
change menu settings.
Return to the previous menu.
Channel List, Media Play
menu, etc.
Description
MEnU button on your remote.
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Display the main on-screen menu.
MEDIA.P
Display Favorite Channel Lists on the screen.
Press to display information on the TV screen.
Exit the menu.
A B C D
MTS: Press to choose stereo, mono or Separate
P.SIZE: Picture size selection.
CC: Controls the caption decoder.
Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must
select the correct source. A source is a device, such as a Blu-ray/DVD player, a
cable/satellite box, antenna or a cable TV input. Sources can be connected to
your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or
through the Antenna or Cable In connections.
To view the signal from a source connected to the
HDMI, DVI, Component, Composite, or D-sub
jack, press the SOUrCE
Each time you press the
change to a different source.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
1. With the power on, press the
on your remote. The main menu appears.
The menu's left side has the following menu
options: Picture, Sound, Channel,
Setup, Input, Application, and Support.
2. Press the ▲ or ▼ button on your remote to
select a menu option, and then press the
EnTErE button.
3. When done using the menu, press the
Audio Program (SAP broadcast).
button on your remote.
SOUrCE button, you
MEnU button
MEDIA.P
MEDIA.P
ExIT button on your remote to exit.
A
MeNU
B C D