Attaching/Detaching The Stand - Sharp LC-40CFG6001K User Manual

ATTACHING THE STAND
Attaching the stand
To complete the stand feet installation you will require a cross head screw driver.
Screws that are included.
4 x
For the LC-40CFG6001K, LC-40CFG6002K, LC-43CFG6001K and LC-43CFG6002K
models only.
For the LC-48CFG6001K, LC-48CFG6002K , LC-49CFG6001K, LC-49CFG6002K,
6 x
LC-50CFG6001K and LC-50CFG6002K models only.
TV panel must be facing downwards.
1
TV panel must be facing downwards.
2
Detaching the stand
Remove the screws highlighted then remove the stand feet from the underside of the TV set.
TV panel must be facing downwards.
L
R
1
2
L
4 x
R
1
2
L
4 x

Attaching/detaching the stand

(fi g.1) Place the TV set on a fl at and
R
clean surface with the panel facing
downwards to avoid damage, then
fi x the stand feet shown.
marked L (left) and R (right).
3
4
(fi g.2) Secure the stand feet to
the underside of the TV set using
the screws provided.
3
4
The feet are
9 9