Power Management Function - Zanussi ZCI66288XA User Manual

Hide thumbs

Table Of Contents

Table of Contents

HOB²HOOD

It is an advanced automatic function which

connects the hob to a special hood. Both the hob

and the hood have an infrared signal communicator.

Speed of the fan is defined automatically on basis

of mode setting and temperature of the hottest

cookware on the hob. You can also operate the fan

from the hob manually.

For most of the hoods the remote

system is originally deactivated.

Activate it before you use the function.

For more information refer to hood

user manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hob is originally

set to H5. The hood reacts whenever you operate

the hob. The hob recognizes temperature of the

cookware automatically and adjusts the speed of

the fan.

Automatic modes

Automatic

light

Mode

Off

Mode

1) The hob detects the boiling process and acti-

vates fan speed in accordance with automatic

mode.

2) The hob detects the frying process and activates

fan speed in accordance with automatic mode.

3) This mode activates the fan and the light and

does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

Boiling

Frying

Off

Fan

speed 1

Off

Fan

speed 1

Fan

speed 1

Fan

speed 1

speed 2

Fan

speed 2

speed 3

2. Touch

until you hear a beep and keep it

pressed until you hear the second beep.

3. Touch

for 3 seconds until

on.

4. Touch

until H and a digit (0 - 6) comes on.

H5 is the default setting.

5. Touch

of the Timer to select the desired

mode (H0 - H6). The chosen mode activates

automatically after 10 seconds.

To operate the hood directly on the

hood panel deactivate the automatic

mode of the function.

When you finish cooking and

deactivate the hob, the hood fan may

still operate for a certain period of

time. After that time the system

deactivates the fan automatically and

prevents you from accidental

activation of the fan for the next 30

seconds.

Operating the fan speed manually

You can also operate the function manually. To do

that touch

when the hob is active. This

deactivates automatic operation of the function and

allows you to change the fan speed manually.

When you press

you raise the fan speed by one.

When you reach an intensive level and press

again you will set fan speed to 0 which deactivates

the hood fan. To start the fan again with fan speed

1 touch

To activate automatic operation of the

function, deactivate the hob and

activate it again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the hob. To do

so set the automatic mode to H1 – H6.

The light on the hood deactivates 2

minutes after deactivating the hob.