LG MC-9287BP Owner's Manual page 37

Insert the shaft of right
plate into the shaft of
motor.
To Clean ROTISSERIE &
Press START.
METAL TRAY
After cooking hold the rotisserie bar of both side with the handle and lift up
When cooking is completed,
the right end slightly and pull out from the left end.
separate the ROTISSERIE from
the food. Take care when
NOTE:
handling both ROTISSERIE &
1. The rotisserie cooking is convenient for grilling of meat and poultry.
metal tray and food stuff as it is
All the surface of the food will become even brown without overturning.
very hot. During cooking it is
2. The rotisserie cooking can be used in grill mode, convection mode and
normal for the ROTISSERIE &
Persian Cook.
metal tray to be stained from the
food. Simply clean the 3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking
ROTISSERIE & metal tray with a is finished remove the rotisserie bar and store with other accessories.
warm soapy water and a soft
cloth. If the ROTISSERIE & metal
CAUTION
tray remain stained after
1. DO NOT USE THE METAL TRAY AND ROTISSERIE WITH NO LOAD, IT WILL BE
washing, Utensils in hot soapy
DAMAGED THE OVEN.
water for a few minutes.
2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.
Do not use metal scouring pads.
3. It is recommended to remove the grease from the turntable every time before
They will scratch the surface .
cooking. Hot grease on the turntable may cause smoke.
Installation & Cooking
Put the shaft of left plate on the
holder of rotisserie.
The shaft of motor
37
Rotisserie
The holder of Rotisserie
Glass Tray
Metal Tray