Selecting The Scanning Area - Epson ES-300C User Manual

1. Place the image you want to scan face down on the scanner.
Select
2.
right of the Scanner Control screen shows the image. Note
that the preview colors may not be accurate unless you
have a true color (24-bit) video card. Wait until you have
scanned the image to judge the colors.

Selecting the Scanning Area

If you want to scan only a portion of the image, follow these
steps:
1. Move the cursor into the preview box.
2. Hold down the mouse button and drag the cursor until the
box encloses the area you want to scan.
3. Release the mouse button.
Once you have defined the scanning area, you can redefine it,
move it, or reselect the default.
After several seconds, the rectangle on the
Preview.
Using TWAIN 3-5