Choosing A Location - Epson PowerLite Home 10 Quick Setup Manual

Choosing a location

The easiest way to set up your projector is to place it on a table
in front of your screen or wall, or on a high shelf behind you.
See the User's Guide for other ways of setting up the projector.
Table
Convenient for temporary front projection. Ideally, place the projector
directly in front of the screen, facing the screen squarely. The base
of the lens should be level with the bottom of the screen.
Shelf
For temporary or permanent installation
on a high shelf. Attach the rubber feet
and place the projector upside-down.
After you turn on the projector, choose
Front/Ceiling for the Projection option
in the Setting menu. See the User's
Guide for details.
The distance between the projector and the screen determines the
size of the image. The diagram below shows approximately how big
your image will be, based on where you set up the projector.
7.9 inches
16.5-25.5'
8-13'
6.5-10'
5-7.5'
3-5'
2.5-4'
40" 40" 40"
30" 30" 30"
Attach the 3 rubber feet
25-38'
80" 80" 80"
60" 60" 60"
Turn over
300" 300" 300"
200" 200" 200"
100" 100" 100"